Large Capacity Slope protection Mortar And Grout Pump Environmental
Mortar And Grout Pump
Transportation and storage of mortar and grout pump:
Mortar and grout pump should not be subjected to severe vibration and impact in the transportation process, so as not to damage the parts; Do not mix with corrosive substances for transportation. The main engine should be stored in a dry, ventilated, non-corrosive place, and do a good job of rain (snow), moisture-proof, waterproof work.
If the mortar and grout pump is placed for a long time and put into use again, attention should be paid to check the aging of the oil pipe and the blockage of the pipeline, and the machine can be tested after troubleshooting.
Parameters of mortar and grout pump:
| Model | SJ200 |
| Grouting (flowing) capacity | 12 m³/h |
| Working pressure | 0-10Mpa |
| Motor power | 22 kw |
| Noise power level | 110db(A) |
| Inlet diameter | 75mm |
| Outlet diameter | 38mm |
| Number of cylinder | 2 |
| Cylinder diameter | 110mm |
| Particle size | less than 5mm |
| Suction height | 2 meter |
| Dimension size | 1900*900*1640mm |
Working performance of mortar and grout pump :
1.Because of full hydraulic pressure, small volume and light weight, it can be used in a wide range of construction.
2.The adjustable performance is better: within the design range, the pressure displacement of the pump can be arbitrarily adjusted. When the pressure exceeds the allowable pressure, the relief valve will automatically open and the cylinder and working cylinder will stop working, thus playing a safe role.
3.In coal mines and other flammable and explosive construction sites, the series of hydraulic grouting motors use explosion-proof motors, but also can be used safely.
4.The anti-seismic pressure gauge is installed in the oil pressure system, which can accurately reflect the working state of the pump.
5.This series of hydraulic grouting pumps can also be used as water pumps, sewage pumps and mud pumps.
Characteristics and scope of application of mortar and grout pump :
1. In highway pavement maintenance, it is used for grouting filling of cement pavement collapse.
2. In the pre-stressed component engineering, it is used for the expansion of mortar injection.
3. In underwater engineering, the dam is strengthened.
4. It is used for grouting slope protection in national defense, national defense engineering and mine tunnel construction.
5. It is used to transport fly ash slurry in thermal power plants.
6. In the chemical industry and paper industry, pulp raw materials and wastes are transported.
7. In metallurgy, iron and steel and other industries, it is used to maintain the grouting of blast furnaces and other equipment.
Picture of mortar and grout pump:
Product Tags:
|
|
Slope Protection Mortar Grout Pump 15Mpa Full Hydraulic Pressure Images
|
